Upper  |
| Para-Aramidic (Kevlar® Kleen) upper material, and special Kevlar® felt 4mm tick. Water-repellent finish |
| Leather |
| Full-grain cowhide Italian leather, waterproofed, black |
| Lining |
Gore-Tex®, Bacteria, pathogen 4-ply laminate — Chemical, Moisture resistant.
Layers are:
- Abrasion-proof lining fabric
- Insulating felt for carrying water vapour
- Waterproof and water vapour permeable PFTE - membrane
- Protective rear side and welding bearer
|
| Front Cap |
| Steel cap manufactured and tested as per EN 344/345 and NFPA 1971, with rubber change over to prevent damage to the membrane and pressure marks |
| Upper Cap |
| Abrasion-resistant flame-resistant rubber compound, black, 1.8 mm thick |
| Heel Cap |
| 1.8 mm resinated synthetic bonded fabric, thermally mouldable, glued to upper material |
| Stitching |
| Meta-Aramid Filament (Nomex®) permanent flame-retardant, water-repellent finish, 220 dtex, black |
| Sole |
Nitrile rubber cemented sole, antistatic, oil and petrol resistant as per EN 344, with additional PU area, Shore hardness of 70 as per DIN 53505, 5 mm tread depth, slip-resistant in lateral and lengthwise direction, self-cleaning.
[The penetration resistant steel plate is insulated and stabilised by injecting polyurethane.] |
| Mid-Sole |
| Antistatic fleece insole with inserted steel link and plastic reinforcement |
| Insole |
| Anatomically shaped, damp-conducting felt sole with copper fibres, deadly to bacteria, circulation channels to the insole, 30 °C washable |
| Laces |
| Meta Aramid Filament (Nomex®) flat laces, water-repellent treated |
| Eyelets |
| Nickel-free, non rusting, 5 mm inside diameter. |
| Fixing hooks |
| Plastic hook with non-rusting pins, fixed with 2 rivets and 2 counter-rivets |
| Zip-closure |
| Spiral-zipper 10 mm wide, with metal pins and support fabric tape 20 mm wide. |
| Shore Hardness |
Outsole - approx. Sh 70
PU core - approx. Sh 45 |
| Outsole energy absorption |
| 40 Joules |
| Upper Height [size 11] |
13 in [outside]
11 in [inside] |
| Weight [size 11] |
| 5 lb (approx) |
| Sizes |
| 7-14 [Men's US] |
| Additional Equipment |
- Reflecting stripes on the outside
- Reflecting top band on upper strap
- Jolly® zip system
- Abrasion-resistant rubber overcap ( 2mm thick)
- Washable antibacterial insole (30°C)
- Climatic system for carrying water vapour
- Stitched in Leather heel slide
|
| Tested |
- EN 344 - EN 345
- Chain Saw Resistance (Class 1)
- Additionally category III° of the standard for Personal Protection Equipment (P.P.E.)
|
| Markings |
- CE Mark
- Test Institute certification number
- Manufacturer
- Article number
- EN 345-2-S1 CR CI HI HRO WR P
- Chain Saw - approval
- Size
- Month of manufacture/Year of manufacture
|
| Warranty |
| Full one-year warranty on all parts, labor, and manufacturers defects. |
